A Bookshelf Update

2018-04-05 15.53.55

Sliding the shelves I milled into the bookshelf I made me realize a crucial mistake, and another mild one.

2018-04-05 16.04.16

First, the shelves were difficult to hammer in with a mallet (not the one I used for the lathe assignment because hardwood on hardwood wouldn’t be good) because the left side of the shelves was assembled upside down, and the distance between the first shelf and second aren’t the identical so it made things crooked. I also did not consider hinges before I CNC’d the whole thing. One visit to Home Depot’s hinge section made me realize that pretty fast. Then there’s the double track mark you can see when looking its back. I wanted to face the back piece the other way so that you would never potentially see this mistake unless you were looking at it from behind. Hasty gluing should be avoided.

2018-04-05 16.04.11

I did not leave myself enough room to install any interior hinges of any kind unfortunately so I’d like to take this a step further and cut off the pocketed area around the body’s front frame so things will look more polished and intentional.

 

Leave a Reply

Your email address will not be published. Required fields are marked *